The SGM25666 is a small single channel load switch with 4mΩ (TYP) on-resistance. The device can operate over a wide input voltage range of 0.1V to 5.5V. It can support a 10A maximum continuous load current and is controlled by the ON pin. The rise time can be programmed by setting an additional capacitor to the SS pin and can also be used to avoid inrush current. There is an open-drain pin, power good (PG) is set to high when the soft-start period is finished.
The device has thermal shutdown function. When the junction temperature exceeds +170 ℃ , the inner N-MOSFET will be turned off through the thermal shutdown circuitry, and will remain off until the die temperature drops below +150℃. The SGM25666 offers the quick output discharge function in disable status and the tF of the output can be programmed through an external resistor.
The SGM25666 is available in a Green UTQFN- 1.5×2-10L package.
- Single Channel Load Switch
- VIN Voltage Range: 0.1V to 5.5V
- Bias Voltage Range: 1.5V to 5.5V
- Maximum Continuous Current: 10A
- On-Resistance: 4mΩ (TYP)
- Programmable Output Ramp Time
- Programmable Quick Output Discharge (QOD)
- Open-Drain Power Good (PG) Signal
- Low Power Consumption:
- On-State (IQ): 10μA (TYP)
- Off-State (ISD): 0.1μA (TYP)
- Thermal Shutdown
- Smart ON Pin Pull-Down, RPD_ON
Industrial PC
Solid State Drive
PC and Notebook
Optical Module
